[ROOT] Samsung galaxy note 4 !! *EXCLUSIVE*

The CF-Auto-Root package now adds support for Samsung's two new devices, Galaxy S5 Prime and Galaxy Note 4. With the SuperSU binary, APK and stock recovery installed , the CF-Auto-Root is the root meant for those who want to keep their devices close to stock. It is the easiest and quickest root method available  so far.

Chainfire, the creator of CF-Auto-Root, has added a number of Galaxy Note 4 varinats to the list with support for other variants exprcted soon, reports XDA. Head over to the source thread to know more about the root file.

Those who are looking for a root method may follow the guide below to manually root the Galaxy Note 4 with CF-Auto-Root.

FTHacks reminds its readers that it will not be held liable for any damage to the device.

Points to remember 

• Install USB Drivers for Samsung Galaxy Note 4 to connect the Android device with the computer.
• Enable USB Debugging Mode on phone to connect it with the computer and use Android SDK with it. [Navigate to Settings>> About phone>> tap Build number seven times. A pop up will appear, that reads, 'You are now a developer.' Go back to the Developer options and check USB debugging and click OK.]
• As the tutorial is likely to wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP then backup data using the same.
• If the Android phone powers off due to lack of battery while the installation process, it could damage the device. Therefore, the Note 4 should have charge above 80% battery charge.
• Rooting the device will void the device of manufacturer's warranty.
• Verify model number of the device and install root package accordingly. Flashing incorrect file might brick the device. 

How to root Samsung Galaxy Note 4 using CF-Auto-Root 

Step-1: Download CF-Auto-Root package for galaxy Note 4, according to the model number

Download links:

SM-N9100 (Qualcomm): CF-Auto-Root-trltechn-trlteduoszc-smn9100.zip  

SM-N910W8 (Canadia, Qualcomm): CF-Auto-Root-trltecan-trltecan-smn910w8.zip

SM-N910C (Thailand, Exynos): CF-Auto-Root-trelte-treltexx-smn910c.zip

SM-N910U (Hong Kong, Exynos): CF-Auto-Root-trhplte-trhpltexx-smn910u.zip

SM-N910S (Korea, Exynos): CF-Auto-Root-trelteskt-trelteskt-smn910s.zip

SM-N9106W (China, Snapdragon): CF-Auto-Root-trltechn-trlteduoszn-smn9106w.zip

SM-N9109W (China, Snapdragon): CF-Auto-Root-trltechn-trlteduosctc-smn9109w.zip

Step-2: Extract the downloaded zip to your computer

If you get a recovery.img and cache.img file, you have extracted twice. You should get an Odin flashable file with .tar.md5 extension 

Step-3: Download Odin v3.09 and extract the zip

Step-4: Power off the Galaxy Note 4

Step-5: Put the phone in download mode. To do so hold Volume Down, Home and Power buttons together. Press a button from the listed menu when it ask to do so to continue the process

Step-6: Connect the phone to the computer using USB cable while it is in the download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time

Step-7: In Odin, click AP button and select the firmware file with.tar.md5 extension

Step-8: Ensure Re-Partition checkbox is not ticked

Step-9: Verify everything and click the Start button in Odin

Step-10: Wait for some time until the installation process is completed then boot the phone

Quick Note:

Sometimes the Android device does not boot into recovery mode and root the device. If this happens, then redo the entire process.

If it is still not rooted, ensure that Auto Reboot option in Odin is not checked. After flashing the root package, pull out the battery and boot the phone into recovery mode by holding the Volume Up, Home and Power buttons together. Doing so will start the installation process.

The Galaxy Note 4 should now be rooted successfully. 

SOURCES: IBtimes.co.uk

[ROOT] the Galaxy Grand Quattro I8552 !!

1.  Download Framaroot 1.6.0

2.  Use a file manager app (Astro or ES File Explorer, for example), navigate to the location ofFramaroot-1.6.0.apk, and install the application.  Make sure you have enabled installation of apps from unknown sources by going to Settings > Security and ticking the Unknown sourcescheckbox.

3.  Go to your  app drawer and open up the Framaroot app.

4.  Tap on Gandalf and wait for the success popup.

5.  Reboot your device.

Your device is now rooted!

SOURCES

Unlock Bootloader & Install CWM Recovery on Android One [Micromax canvas A1] [Karbonn Sparkle V] [Spice Dream UNO]

Step 1. Download the ADB and fastboot drivers here and extract the folder on your desktop.
Step 2. Switch off your phone and boot it in bootloader/fastboot mode. To do this Hold Volume Up Key + Volume Down Key and then press the Power button.
Step 3. Now open the ADB folder on your desktop and Press Shift key + Right click on any empty space inside the folder, and select Open command window here.
Step 4. Execute following commands
fastboot oem unlock
fastboot format userdata

Now the bootloader is unlock and next step is to install the CWM recovery.
Step 5. Download the recovery.img from here and paste the recovery.img file in the ADB folder. (The same folder that your downloaded in step 1)
Step 6. Reboot the phone into bootloader/fastboot mode. To do this open the ADB folder on your desktop and Press Shift key + Right click on any empty space inside the folder, and select Open command window here. And enter the folowing command.
adb reboot bootloader
Step 7. Now your phone is booltloader mode. Flash the recovery image and reboot
fastboot flash recovery recovery.img
fastboot reboot

Now the phone will reboot and CWM recovery is installed on your Android One device.


SOURCES

[ROOT] Android One Smartphones [Micromax canvas A1] [Karbonn Sparkle V] [Spice Dream UNO]

Step 1. Open the browser app on you phone and visit this link towelroot.com.
Step 2. From the site click on the lamba symbol to download the apk file on your phone.
Step 3. Now install the apk file on your phone.
Step 4. Once the installation process is done, Open Towelroot app and tap the “make it ra1n” button to begin the rooting process. Then wait till it is finished.

Step 5. Now visit the google play store and install the SuperSU app from Play store


SOURCES

[ROOT] Xolo Q600s without PC!

Downloads:

1.Towelroot

STEPS:

Install the Towelroot APK file you downloaded above on your phone.During installation you might get a notification like “Google recommends that you do NOT install this app”. It’s okay, it appears because the app plays with Android’s security protocols.

Open Towelroot app and tap the “make it ra1n” button to begin the rooting process. Then wait till it is finished.

1. Once Towelroot is done rooting your phone, install the SuperSU app from Play store to manage superuser permissions for apps.

SOURCE :Theanroidsoul

[Root] Samsung galaxy grand neo [I9060]

Downloads:

1.Samsung USB drivers

2.Pre-rooted 4.2.2 jellybean firmware.

3.Odin 3.09

STEPS (CALM AND PERFECT) :

1. First pleas enable "USB Debugging Mode" on your Grand Neo and switch it off.

2. In the power down state press and hold "Home+Volume Down+Power" buttons to enter your phone in "Download Mode". Press "Volume Up" button once you see a similar screen like the one given below.

Once you are entered in download mode you will see a similar screen like the one given below.

3. Now open Odin and connect your Grand Neo with USB cable to your computer. If the connection was successful the ID: COM box will turn to light blue in the Odin window.

4. In the next step you need to check mark "Auto Reboot" and "F. Reset Time" in the Odin anduncheck "Re-Partition". Then please click "AP" button and select the ".tar.md5" (which you got after extracting the preroot firmware )file.

5. Once you are confirmed every step is followed as above mentioned, click "Start" button, the installation process will initiate. Once the procedure is completed successfully your phone will restart and you will get a "Pass" message from the Odin window.

That's it you have now successfully rooted your Samsung Galaxy Grand Neo GT-I9060 with Android 4.2.2 Jelly Bean. Now disconnect the USB cable and enjoy the maximum out of it.

Jailbreak iPhone 3G [Firmware 4.2.1]

Step 1:

On Mac:

1. Download the Mac version of Redsn0w
2. Open it and navigate to your Downloads folder, and find the folder called Redsn0w.
3. Open the Redsn0w folder and launch the app.

On Windows:

1. Download the Windows version of Redsn0w
2. Click open in the dialog box
3. Double click the Redsn0w folder
4. Double click on the Redsn0w application
5. Click run.

Step 2:

The next step is to download the appropriate firmware for your device. If you followed the rest of the guide, clicking on the download link will download the firmware that’s right for you. This download may take a bit of time.

Once you have your firmware, it’s time to jailbreak. Go to the Redsn0w window that you should already have open, and we can get started.

1. Click the browse button in the Redsn0w window, and select the firmware file you just downloaded.
2. Once you’ve selected your firmware, click next.
3. In the next screen there will be several checkboxes, but the crucial one to check is the “Install Cydia” checkbox.
4. Click next.

Step 3:

The next part of the process is to get your device ready for Redsn0w to do the jailbreak. It’s easy to mess this part up, so read through all of these steps to make sure you get it right. The instructions and a counter are right there in the app to help you out with this step after you click next. But make sure you are ready, because it starts right away. 

1. Turn off your device by holding the sleep button for 5 seconds and sliding to power off.
2. With the device turned off hold just the sleep button for 3 seconds.
3. After three seconds are up, continue holding the sleep button and then start holding the home button.
4. Hold the sleep and home buttons for 10 seconds. When 10 seconds pass, release the sleep button and continue holding the home button for 8 seconds.
5. After 8 seconds you can release the home button, and watch Redsn0w do it’s thing.

After about 5 minutes your device will reboot and you’ll see the Apple logo. If you can see the Cydia icon on your home screen, you’re jailbroken! Now you can start loading your device with tons of cool apps off the Cydia app store.

Downloads:

Redsn0w For Mac

Redsn0w For Windows

Firmware Download Link

SOURCE :GuideMyJailbreak