How to install Android 4.3 Jelly Bean to Samsung Galaxy Y

The whole procedure is very simple to understand and
apply. But still if have any problem then ask us via
commenting.
1. Firstly download all the four zip files listed in
download section and put them to SD card of
your device. Don’t put them under any directory
or folder, just open SD card and copy them
there.
2. Now turn off the device and wait for 5-7
seconds.
3. Now hold and press Volume UP + Home +
Power button at same time until Samsung logo
appears on screen. Now release the buttons
and you’ll be entering to recovery mode very
soon.
4. Note: – This step is only for stock recovery
users. If you’re already on CWM recovery then
skip this step. From recovery mode, select
“apply update from sdcard” and then “choose
zip from SD card”. Find and locate TempCWM.
zip file and select “Yes” on next screen to
confirm your selection. Now you’ll be at new
recovery mode.
5. Now go to select “mounts and storage” and
then mount the followings: mount mount
system,mount data and mount cache.
6. Now select “install zip from sd card” then
“Choose zip from sdcard”. Find and locate the
“White1.3.3.zip” file. On next screen select
“Yes” to confirm the installation process. This
is the kernel file and this is required by this
ROM.
7. Now select “install zip from sd card” then
“Choose zip from sdcard”. Find and locate the
“dhd1.0 White Xp.zip” file. On next screen
select “Yes” to confirm the installation
process.
8. Now go to “advance” and then select “Reboot
Recovery”.
9. Now go to “mounts and storage” and “format”
followings: format system, format data and
format cache.
10. Now go to select “mounts and storage” and
then mount the followings: mount mount
system,mount data and mount cache.
11. Go back main menu of recovery, again, and go
to Advanced-> Wipe Dalvik Cache and select
Yes from the next screen to confirm it.
12. Now its time to flash the ROM file . Select
“install zip from sd card” then “Choose zip
from sdcard”. Find and locate the “CyanoCream
V3 JB-Edition.zip” file. On next screen select
“Yes” to confirm the installation process.
13. After it completes, from menu select “Wipe
data/Factory reset”, then select “Yes” on the
next screen to confirm it.
14. Go back to main menu and select “reboot
system now”. You’re don with installation
process.
So you have installed Android 4.3 Jelly Bean custom
ROM on your Galaxy Y . For the first time it will take
several minutes, which is normal. Fill your Google
Account details to get started with phone and for the
high performance, follow the below final touch steps.
Final Touch up for Galaxy Y Running Android 4.3
When you
done with
installing
the ROM
and
configuring
the Google
Account,
you’ll
notice that
performance is not high, it is average. To make high
performance, you need to perform following
configuration setting to your device.
Firstly, we will configure the CPU settings. Go to
settings then on top of the screen you’ll see multiple
tabs, Settings, Parts, Core and About. Select the “ Core ”
tab and then “ Performance “. Now you’ll be at
Performance control, there select CPU Control then, tap
on “ Governor” option and select the “performance ”
radio button.
After it, Tap on I/O scheduler and then select “ sio”
radio button. Now check the Apply on button box and
then tap the apply button placed at down left side. Now
you’ve done with CPU setting, you’ll see a huge
difference in performance just applying settings.
Now, from your menu look for the “ Seeder” named app.
Launch it turned it on and check all boxes listed there.
From “ RNG services performance profile ” select
“ Aggressive“. This app will help your phone to launch,
switch and run apps as quick as possible, it over all
play good roll in improving phone performance.

Downloads:
Cyanocream v3 custom rom : Download here

The white xp kernel zip : Download here

TempCWM.zip : Download here

Wifi drivers for white xp kernel : Download here